Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 3.6L - Introduction >> Repair Instructions >> Engine Coolant Temperature Sensor Replacement >> Installation Procedure

Installation Procedure

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
    Fig 1: Identifying Engine Coolant Temperature Sensor
    GM1949790Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the coolant temperature sensor (1) to the engine and tighten to 22 N.m (16 lb ft).
    2. Fig 2: Identifying Engine Coolant Temperature Sensor Electrical Connector
    GM1949787Courtesy of GENERAL MOTORS CORP.
  2. Install the coolant temperature sensor electrical connector (1) to the coolant temperature sensor.
  3. Inspect and fill the cooling system as necessary. Refer to Cooling System Draining and Filling (3.6 L) .
scientia non olet · About Brad's Car Manuals