Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Porsche >> 1987 >> 944 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> DME Control System >> Diagnosis & Testing >> Reference Mark Sensor Check

Reference Mark Sensor Check

Download the full database via torrent (~1.1 TB)
NOTE: This is an alternate test when an oscilloscope is not available.
  1. Using same LED tester as used for speed sensor, connect positive lead to CU harness connector terminal No. 25 and negative lead to terminal No. 26.
  2. Operate starter, but do not start engine. If sensor is sending a signal, LED should flicker dimly.
scientia non olet · About Brad's Car Manuals