Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Porsche >> 2000 >> Boxster Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Removing and installing pulse sender >> Installation

Removing and installing pulse sender: Installation

Download the full database via torrent (~1.1 TB)
  1. Install pulse sender. Tightening torque of the pan-head screw (M6x16): 10 +/- 0.5 Nm (7.5 +/- 0.5 ftlb.).
  2. Push in lower plug half on the holder.
  3. Push plug on until it audibly engages.
scientia non olet · About Brad's Car Manuals