Grind Complete
Includes: Remove carbon, check surfaces for warpage, reface or replace Valves, resurface Valve Seats and clean Valve Guides. Adjust Valves (where applicable).| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| w/Fuel Injection | 8.5 | A | ||
| w/o Fuel Injection | 7.3 | A | ||
| Combination Procedure: CYLINDER HEAD STUD: Install: | ||||
| Oversize,Each | 0.2 | B | ||
| Combination Procedure: ROCKER ARM &/OR SHAFT: Disassemble & Assemble: | ||||
| 0.5 | B | |||
| Combination Procedure: VALVE GUIDE: Remove & Replace: | ||||
| Each Additional | 0.2 | A | ||
| One | 0.3 | A | ||