Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Renault >> 1983 >> LeCar 2D Hatchback >> Repair and Diagnosis >> Engine Performance >> Ignition System - Non-Turbo >> Testing >> Testing System When Engine Will Not Start >> Ignition Coil And Electronic Control Unit Check

Ignition Coil And Electronic Control Unit Check

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Turn the ignition switch to the "ON" position. Connect positive voltmeter lead to ignition coil positive terminal. Connect remaining lead to ignition coil negative terminal. See Fig 1.
  2. Quickly move a magnet back and forth over impulse sender coil. If voltmeter needle moves, but engine would not start, replace ignition coil. If needle does not move, replace ignition control unit.
NOTE: This is only necessary when vehicle will not start, and other tests have been performed.
Fig 1: Voltmeter Hookup for Checking Ignition Coil & Electronic Control Unit Attach leads to primary coil terminals.
G28961