Control Module: Service and Repair

Download the full database via torrent (~1.1 TB)

Transmission Control Module (TCM)
REMOVAL

Disconnect the ground cable from battery.

Remove the lower cover and then disconnect the connector.
Remove the knee bolster.

Disconnect the connectors from TCM.

(A) Transmission control module (TCM)
(B) Brake pedal
Remove the TCM.

INSTALLATION
Install the TCM.
Tightening torque: 7.5 Nm (0.76 kgf-m, 5.5 ft. lbs.)

(A) Transmission control module (TCM)
(B) Brake pedal
Connect the connectors to TCM.
Install in the reverse order of removal.