Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Saab >> 2005 >> 9-7X Linear >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 4.2L - Introduction >> Repair Instructions >> Knock Sensor (KS) Replacement >> Installation Procedure

Installation Procedure

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
    Fig 1: Locating Knock Sensor Components
    GM727528Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Component Fastener Tightening Notice in Cautions and Notices.
  1. Install the knock sensor (1 or 2) and the bolt (3).

    Tighten:  Tighten the sensor to 25 N.m (18 lb ft).

  2. Connect the knock sensor harness connector (4).
  3. Lower the vehicle.
scientia non olet · About Brad's Car Manuals