Vehicle Speed Sensor: Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Vehicle Speed Sensor Replacement

Removal Procedure

1. Remove the harness connector.
2. Remove the bolt (2).
3. Remove the vehicle speed sensor (1).
4. Remove the O-ring seal (3).

Installation Procedure

1. Install the O-ring seal (3) on the vehicle speed sensor (1).
2. Coat the O-ring seal (3) with a thin film of transmission fluid.
3. Install the vehicle speed sensor (1) into the transmission case.

Notice: Refer to Fastener Notice.

4. Install the bolt (2).

Tighten the bolt to 11 Nm (97 in. lbs.).

5. Connect the wiring harness electrical connector to the vehicle speed sensor.
6. Refill the fluid as required.