Removal & Installation: Notes
WARNING:
Some of the following service procedures require that ABS motors be cycled up and down using "Scan" tester. DO NOT drive or operate vehicle with ABS hydraulic control unit in tension-released position. With tension released, excessive pedal travel and reduced brake effectiveness could occur. Always perform "Scan" tester SPECIAL TEST, RUN ABS MOTORS, and PISTONS UP-HOME functions before driving vehicle.
CAUTION:
When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES
article in the GENERAL INFORMATION section before disconnecting battery.