Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Saturn >> 2001 >> SW2 Automatic >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Removal & Installation >> Transaxle Range Switch >> Installation

Transaxle Range Switch: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Install the switch to the transaxle and install the switch-to case bolts. Do not tighten bolts at this time.
  2. Install the control lever-to-manual shift shaft.
  3. Prevent the manual shift shaft from rotating by holding the control lever while installing the retaining nut. Tighten to specifications. See TORQUE SPECIFICATIONS  .
  4. Install the cable to the control lever and adjust the cable. See SHIFT CABLE under ADJUSTMENTS in appropriate SERVICING - A/T article in AUTOMATIC TRANSMISSION.
  5. Before tightening the transaxle range switch-to-case bolts, proceed to the adjustment procedure.
scientia non olet · About Brad's Car Manuals