Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) >> Repair Instructions >> Ignition Coil(s) Replacement >> Installation Procedure

Installation Procedure

Download the full database via torrent (~1.1 TB)
    IMPORTANT: Make sure that the ignition coil seals are properly seated to the valve cover.
  1. Install the ignition coil.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the ignition coil retaining bolts.

    Tighten:  Tighten the ignition coil retaining bolts to 10 N.m (89 lb in).

  3. Replace the ignition coil connectors.
  4. Install the ignition coil cover.
  5. Install the ignition coil cover screws.

    Tighten:  Tighten the screws to 8 N.m (71 lb in).

    6. Fig 1: View Of Ignition Coils
    GM1387190Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Brad's Car Manuals