Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Saturn >> 2005 >> L300 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Exhaust Gas Recirculation (EGR) Valve Replacement >> Installation Procedure

Installation Procedure

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Make sure the EGR valve mating surface is clean.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the EGR valve with a new gasket and new attachment bolts.

    Tighten:  Tighten the EGR valve bolts to 20 N.m (15 lb ft).

    3. Fig 1: Removing/Installing EGR Valve
    GM894683Courtesy of GENERAL MOTORS CORP.
  3. Connect the EGR valve harness connector. Push the connector in until the lock position is felt, then pull back to confirm engagement.
scientia non olet · About Brad's Car Manuals