Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Saturn >> 2005 >> Relay FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.5L - Introduction (2 Of 2) >> Repair Instructions >> Ignition Control Module Replacement >> Installation Procedure

Installation Procedure

Download the full database via torrent (~1.1 TB)
    Fig 1: Removing/Installing 4 Screws Securing Ignition Coil And Module Assembly To Bracket
    GM1238999Courtesy of GENERAL MOTORS CORP.
  1. Install the ignition coil and module assembly to the bracket.
    2. NOTE: Refer to Fastener Notice .
  2. Install the ignition coil and module assembly screws.

    Tighten:  Tighten the screws to 4.5 N.m (40 lb in).

  3. Connect the spark plug wires as noted during the removal.
  4. Connect the brake booster vacuum hose from the intake manifold.
scientia non olet · About Brad's Car Manuals