Ignition Coil: Service and Repair

Download the full database via torrent (~1.1 TB) | Custom patches

Ignition Coil Replacement

Removal Procedure

1. Ensure that the ignition key is in the OFF position.
2. Remove the intake manifold cover.
3. Disconnect the ignition coil electrical connector(s) (1).

4. Remove the ignition coil bolt(s).
5. Remove the ignition coil(s).

Installation Procedure

1. Install the ignition coil(s).

Notice: Refer to Fastener Notice.

2. Install the ignition coil bolt(s).

Tighten the bolt(s) to 10 N.m (89 lb in).

3. Connect the ignition coil electrical connector(s) (1).
4. Install the intake manifold cover.