Air Flow Meter/Sensor: Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Mass Airflow Sensor Replacement

Removal Procedure

1. Open the hood.

2. Remove the mass airflow sensor.
3. Disconnect the wiring harness plug (2).
4. Remove the 2 clamps (1).

Installation Procedure

Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the mass airflow sensor.

Tighten the 2 clamps to 3.5 Nm (31 lb in).
Install the wiring harness plug.
2. Close the hood.