Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Scion >> 2004 >> xB Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Generators & Regulators >> Removal & Installation >> Generator

Removal & Installation: Generator

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Disconnect negative battery cable.
  2. Remove battery nut and wire from generator.
  3. Disconnect generator wire harness connector.
  4. Remove wire harness clamp.
  5. Loosen both generator mounting bolts.
  6. Release serpentine drive belt tension, and remove belt.
  7. Remove both generator mounting bolts. If necessary, remove serpentine belt adjusting bar. See Fig 1.
    Fig 1: Locating Serpentine Belt Adjusting Bar
    G00356525Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. Remove generator.
  9. To install, reverse removal procedure. Install serpentine drive belt. For belt routing, see Figure. Adjust belt tension by moving generator. See BELT TENSION  under ADJUSTMENTS. Tighten generator bolts to specification. See TORQUE SPECIFICATIONS .