Inspection Procedure

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

RESET POWER WINDOW REGULATOR MOTOR
1. Reset the power window regulator motor for the power window that does not fully close (See INITIALIZATION ).
2. Check if the power window AUTO UP/DOWN function operates normally.
  OK: AUTO UP/DOWN function operates normally.
NG: Go to step 2

OK: END
CHECK FRONT DOOR WINDOW REGULATOR SUB-ASSY
1. Remove the door glass (See WINDSHIELD GLASS ).
2. Operate the power window regulator without installing the door glass using the power window switch.
3. Check that the power window regulator operates smoothly.
  OK: Power window regulator operates smoothly.
NG: REPLACE FRONT DOOR WINDOW REGULATOR SUB-ASSY

OK: REPLACE DOOR GLASS RUN