On-Vehicle Inspection

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

INSPECT THROTTLE BODY IDLE SPEED CONTROL VALVE ASSY
NOTE:
- Since the Idle Speed Control Valve (ISC valve) has an internal IC circuit which converts the ECM duty signal into the drive signal, it is impossible to check its resister value and valve operation with the valve alone.
- Clear the DTC after inspection.
HINT:

DTC P0505 will be set when the ISC valve is stuck.
1. Check the operation.
  1. Connect the ISC valve connector to the ISC valve.
  2. Check the valve movement when the ignition switch is turned ON.
Movement:

Half open -> fully close -> fully open -> half open

HINT:

The series of the valve movement mentioned above is done within 0.5 second.

Fig 1: Identifying Throttle Body Idle Speed Control Valve Assembly

G03096741

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002