Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Scion >> 2006 >> tC Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (2AZ-FE) >> Mass Air Flow Meter >> Installation

Mass Air Flow Meter: Installation

Download the full database via torrent (~1.1 TB)
  1. INSTALL MASS AIR FLOW METER 
    1. Install the mass air flow meter with the 2 screws.
      NOTE: Make sure that the O-ring is not cracked or jammed when installing.
    2. Connect the mass air flow meter connector.
  2. CONNECT CABLE TO BATTERY NEGATIVE TERMINAL 
  3. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
    NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
    Fig 1: Installing Mass Air Flow Meter With Screws
    G04221323Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Brad's Car Manuals