Crankshaft Position Sensor: Inspection

INSPECT CRANKSHAFT POSITION SENSOR

Measure the resistance of the sensor.

Standard resistance

CRANKSHAFT POSITION SENSOR TESTER CONNECTION AND SPECIFIED CONDITION

Tester Connection	Specified Condition
1(NE+) - 2(NE-)	985 to 1,600 Ω at cold
1 (NE+) - 2 (NE-)	1,265 to 1,890 Ω at hot

NOTE: Cold and Hot mean the temperature of the coils themselves. Cold is from -10 to 50°C (14 to 122 F) and Hot is from 50 to 100°C (122 to 212°F).

If the result is not as specified, replace the crankshaft position sensor.

Fig 1: Measuring Resistance Of Sensor Terminals