Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Scion >> 2008 >> xD Automatic >> Repair and Diagnosis >> Engine Performance >> 2ZR-FE Engine Control System >> Crankshaft Position Sensor >> Removal

Crankshaft Position Sensor: Removal

Download the full database via torrent (~1.1 TB)
  1. REMOVE ENGINE UNDER COVER RH 
  2. REMOVE CRANKSHAFT POSITION SENSOR 
    1. Disconnect the crankshaft position sensor connector.
    2. Remove the bolt and remove the crankshaft position sensor.
      Fig 1: Locating Crankshaft Position Sensor Bolt
      G05398770Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Brad's Car Manuals