Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 1992 >> Justy Base >> Repair and Diagnosis >> Electrical >> Starter >> On-Vehicle Testing >> Ignition Switch Test >> Start Circuit Test

Start Circuit Test

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove lower instrument panel below steering wheel. Remove air duct. Remove harness connector from rear of ignition switch.
  2. Using jumper wire, apply 12 volts to switch terminal "B". Connect test light to switch terminal "S". Turn ignition switch to START position. Test light should illuminate. If not, replace ignition switch.
scientia non olet · About Brad's Car Manuals