Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 1993 >> Justy Base >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Adjustments >> Throttle Position Sensor/Switch >> 4-Cylinder Throttle Position Sensor >> Impreza

4-Cylinder Throttle Position Sensor: Impreza

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Turn ignition on. With throttle fully closed, measure and record voltage to ground at specified ECM terminals. Open throttle fully. Repeat voltage measurements. Refer to the TPS VOLTAGE SPECIFICATIONS (IMPREZA)  table.
    TPS VOLTAGE SPECIFICATIONS (IMPREZA)

    Terminal Voltage
    Throttle Closed
    No. 4 0.4-0.5
    No. 11 0
    No. 15 4.4-5.5
    Throttle Closed
    No. 4 3.5-4.3
    No. 11 0
    No. 15 4.4-5.5
  2. If necessary, loosen retaining screws and rotate TPS until correct voltages are obtained. Replace TPS if voltage cannot be adjusted to specification.