Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Diagnostic Procedures >> Ignition Systems >> Crankshaft Position Sensor Resistance >> 2.2L & 2.5L

2.2L & 2.5L

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Crankshaft position sensor is located on oil pump, at front center of cylinder block. Disconnect negative battery cable. Remove bolt attaching crankshaft position sensor to cylinder block. Remove crankshaft position sensor and disconnect electrical harness connector.
  2. Using an ohmmeter, check resistance between electrical terminals on crankshaft position sensor. Crankshaft position sensor resistance should be 1000-4000 ohms. If resistance is not as specified, replace crankshaft position sensor.
scientia non olet · About Brad's Car Manuals