Abs Sensor

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

WARNING: This page is about a different car, the 2003 Subaru Outback, 2003 Subaru Legacy, and 2003 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

Check pole piece of ABS sensor for foreign particles or damage. If necessary, clean pole piece or replace ABS sensor.

Measure ABS sensor resistance.

Fig 1: Measuring ABS Sensor Resistance

Courtesy of SUBARU OF AMERICA, INC.

TERMINAL SPECIFICATION

Terminal No.	Standard
1 and 2	1.25+/-0.25 kohm

CAUTION: If resistance is outside the standard value, replace ABS sensor with new one.

NOTE: Check ABS sensor cable for discontinuity. If necessary, replace with a new one.