Grind Complete
WARNING: This page is about the Outback Base, Automatic, which is a different variant/trim than selected.
Includes: R&I Engine Assembly (where noted). Remove carbon, check surfaces for warpage, reface or replace Valves, resurface Valve Seats, clean Valve Guides, adjust Valves.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 2.5L Eng, Both | 14.0 | A | ||
| Combination Procedure: CYLINDER HEAD STUD: Remove & Replace: | ||||
| Each | 0.1 | B | ||
| Combination Procedure: VALVE GUIDE: Remove & Replace: | ||||
| Each Additional | 0.2 | A | ||
| One | 0.3 | A | ||