Engine Control Module: Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

REMOVAL

1. Disconnect battery ground cable.

2. Remove lower inner trim of passenger side.

3. Detach floor mat of front passenger seat.

4. Remove protect cover.

5. Remove nuts which hold ECM to bracket.

6. Remove clip from bracket.

7. Disconnect ECM connectors and take out ECM.

INSTALLATION
Install in the reverse order of removal.

CAUTION: When replacing ECM, be careful not to use the wrong spec. ECM to avoid any damage to the fuel injection system.