Control Module: Service and Repair

Download the full database via torrent (~1.1 TB)

REMOVAL

1. Disconnect battery ground cable.

2. Remove lower cover and then disconnect connector.
3. Disconnect connectors from transmission control module.

MPT model

VT model
4. Remove transmission control module.
INSTALLATION
1. Install transmission control module.
Tightening torque: 7.5 Nm (0.76 kgf-cm, 5.5 ft. lbs.)

MPT model

VT model
2. Connect connectors to transmission control module.
3. Install in the reverse order of removal.