Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2003 >> Baja Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs >> Front ABS Sensor >> Removal

Front ABS Sensor: Removal

Download the full database via torrent (~1.1 TB)
  1. Disconnect battery ground cable.
  2. Disconnect front ABS sensor connector located next to front strut mounting house in engine compartment.
  3. Remove bolts which secure sensor harness to strut.
    Fig 1: Removing Bolt Securing Harness To Strut
    G02873161Courtesy of SUBARU OF AMERICA, INC.
  4. Remove bolts which secure sensor harness to body.
    Fig 2: Removing Bolt Securing Harness To Body
    G02873162Courtesy of SUBARU OF AMERICA, INC.
  5. Remove bolts which secure front ABS sensor to housing, and remove front ABS sensor.
    CAUTION:
    • Be careful not to damage pole piece located at tip of the sensor and teeth faces during removal.
    • Do not pull sensor harness during removal.
Fig 3: Removing Bolts Securing Front ABS Sensor
G02873163Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Brad's Car Manuals