Fuel Tank Pressure Sensor: Service and Repair

REMOVAL

1. Set the vehicle on the lift.
2. Open fuel flap lid, and remove fuel filler cap.




3. Disconnect battery ground cable.
4. Lift-up the vehicle.
5. Disconnect connector from fuel tank pressure sensor and fuel tank sensor control valve.




6. Disconnect pressure hose from fuel tank pressure sensor.




7. Remove fuel tank pressure sensor and fuel tank sensor control valve with bracket.




8. Remove fuel tank sensor control valve from bracket.

NOTE: Fuel tank pressure sensor cannot be removed because it is integral with bracket.

INSTALLATION





Install in the reverse order of removal.

Tightening torque: 7.4 N.m (0.75 kgf-m, 5.4 ft-lb)