A/C - Compressor Cuts Out
H6 A/C COMPRESSORS CUTTING OUTIf you come across an H6 A/C system where the compressor is cutting out when the A/C is engaged, it might be the revolution sensor on the compressor that is causing the problem. To determine if this is the cause of the concern, you can find diagnostic information in the 09/01 edition of the Tech TIPS Newsletter.
Once you have determined that the revolution sensor is the problem, be advised that the sensor is now available as a separate part. It is no longer necessary to replace the entire compressor as in the past. Refer to Service Bulletin 10-74-02 for more information.