Control Module: Service and Repair

Download the full database via torrent (~1.1 TB)

Transmission Control Module (TCM)

REMOVAL

1. Disconnect the around cable from battery.
2. Remove the lower cover and then disconnect the connector.

3. Remove the knee bolster.

4. Disconnect the connectors from transmission control module.

5. Remove the transmission control module.

INSTALLATION

1. Install the transmission control module.
Tightening torque: 25 Nm (2.5 kgf-m, 18.1 ft. lbs.)
2. Connect the connectors to transmission control module.
3. Install in the reverse order of removal.