Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2004 >> Baja Base, Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Security And Locks >> Security Control Module >> Removal

Security Control Module: Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Disconnect the ground cable from battery.
  2. Remove front cover (A).
  3. Remove screws (B) and then detach center panel (C) while disconnecting connector.
    Fig 1: Removing Front Cover
    G03510352Courtesy of SUBARU OF AMERICA, INC.
  4. Remove two screws.
    NOTE: Before removing the screw, apply a few turns of butyl tape to the tip of the service tool. This prevents the screw from falling during removal.
    Fig 2: Removing Screws
    G03510353Courtesy of SUBARU OF AMERICA, INC.
  5. Remove radio and security control module together while disconnecting connector. Refer to REMOVAL , Radio.