Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2005 >> Baja Base, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension >> Front Strut >> Inspection >> Damper Strut

Damper Strut

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Check for oil leakage.
  2. Move the piston rod up and down to check it operates smoothly without any binding.
  3. Play of piston rod
    • Measure the play as follows:

      Fix outer shell and fully extend the rod. Set a dial gauge at the end of the rod: L [10 mm (0.39 in)], then apply a force of W [20 N (2 kgf, 4 lb)] to threaded portion. With the force of 20 N (2 kgf, 4 lb) applied, read dial gauge indication: P1 Apply a force of 20 N (2 kgf, 4 lb) in the opposite direction of "W", then read dial gauge indication: P2 .

      Fig 1: Setting Dial Gauge At End Of Rod
      G03751282Courtesy of SUBARU OF AMERICA, INC.

The free play is determined by the following equation:

Play = P1, P2 

Standard of play: 

Less than 0.8 mm (0.031 in) 

If the play is greater than the standard, replace the strut.