Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2005 >> Outback R >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Impact Sensor >> Installation

Impact Sensor: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove the key from ignition switch.
  2. Close all the doors, trunk lid and rear gate.
  3. Press the UNLOCK button of transmitter.
  4. Disconnect the ground cable from battery.
  5. Install the impact sensor.
  6. Connect the ground cable from battery.
  7. Change the setting of impact sensor using Subaru Select Monitor.