Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2005 >> Outback R >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Security System >> Inspection >> Check Security System Condition Memory

Check Security System Condition Memory

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove the key from ignition switch.
  2. Close all the doors, trunk lid and rear gate.
  3. Open the hood.
  4. Press the LOCK button of transmitter, and then wait until the security indicator light flashes twice for 0.5 sec at intervals of 2 seconds.
  5. Disconnect the ground cable from battery.
  6. Connect the battery ground cable to battery.
  7. Check that the security indicator light blinks twice within 0.5 seconds in 2 seconds cycle. When it does not blink, replace the body integrated unit.