Condition Check
NOTE:
When replacing ATF, check the inside condition of transmission body by inspecting the drained ATF.
ATF SPECIFICATION
| Fluid condition | Trouble and possible cause | Corrective action |
|---|---|---|
| Large amount of metallic pieces are found. | Excessive wear of the internal of the transmission body. | Replace ATF and check if AT operates correctly. |
| Thick and varnish-form fluid. | Burned clutch, etc. | Replace ATF and check the AT body or vehicle for faulty. |
| Clouded fluid or bubbles are found in fluid. | Water mixed in fluid. | Replace ATF and check the water entering point. |