Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2007 >> Outback F4-2.5L SOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Service and Repair

Crankshaft Position Sensor: Service and Repair

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
Crankshaft Position Sensor

REMOVAL




1. Disconnect the ground cable from the battery.
2. Remove the generator.




3. Remove the bolt which installs crankshaft position sensor to cylinder block.




4. Remove the crankshaft position sensor, and then disconnect the connector from it.

INSTALLATION
Install in the reverse order of removal.






Tightening torque: 6.4 N.m (0.65 kgf-m, 4.7 ft-lb)