Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2007 >> Outback XT Limited, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H4DOTC) >> Camshaft Position Sensor >> Removal

Camshaft Position Sensor: Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  3. Disconnect the connector from camshaft position sensor RH.
  4. Remove the camshaft position sensor RH from the rear side of the cylinder head.
    Fig 2: Locating Camshaft Position Sensor RH Bolt
    G05017802Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the cam shaft position sensor LH in the same way as RH.
scientia non olet · About Brad's Car Manuals