Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Brake System) >> Stop Light Switch >> Installation

Stop Light Switch: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Screw the stop light switch onto a bracket and secure it temporarily with a nut.
  2. Adjust the stop light switch position, and then tighten the nut.

< Ref. to , ADJUSTMENT , Stop Light Switch. >

Tightening torque: 

8 N.m (0.8 kgf-m, 5.8 ft-lb) 

Fig 1: Installing Stop Light Switch
G03833022Courtesy of SUBARU OF AMERICA, INC.