Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (4AT) >> Front Differential Assembly >> Disassembly >> Differential Case Assembly

Differential Case Assembly

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove the taper roller bearing using the ST and a press.

    ST 498077000 REMOVER

    Fig 1: Removing Taper Roller Bearing
    G05002714Courtesy of SUBARU OF AMERICA, INC.
  2. Secure the case in a vise, remove the hypoid driven gear tightening bolts, and then separate the hypoid driven gear into differential case (RH) and differential case (LH).
    Fig 2: Identifying Hypoid Driven Gear And Differential Case
    G05668487Courtesy of SUBARU OF AMERICA, INC.
  3. Pull out the straight pin and pinion shaft, then remove the differential bevel gear, washer and differential bevel pinion.
    Fig 3: Pulling Straight Pin And Pinion Shaft
    G05668488Courtesy of SUBARU OF AMERICA, INC.