Coolant Temperature Sensor/Switch (For Computer): Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Engine Coolant Temperature Sensor

REMOVAL
1. Disconnect the ground cable from the battery.

2. Remove the generator.
3. Disconnect the connectors from the engine coolant temperature sensor.

4. Remove the engine coolant temperature sensor.

INSTALLATION
Install in the reverse order of removal.

NOTE: Use a new gasket.

Tightening torque: 18 N.m (1.8 kgf.m, 13.3 ft.lb)