Check With SUBARU Select Monitor

CAUTION: Check that the rear window defogger timer is in initial setting or customize setting before performing inspection.

Check the input signal when the rear window defogger switch is operated using Subaru Select Monitor.
1. Prepare the Subaru Select Monitor kit. < Ref. to PREPARATION TOOL , General Description.>
2. Turn the ignition switch to ON (engine OFF), and run the "PC application for Subaru Select Monitor".
3. On the « System Selection Menu » display screen, select the {Integ. Unit mode}.
4. Select the {Current Data Display & Save}.
5. Display the data of rear window defogger switch.
After rear defogger switch is set to ON, make sure that it turns to OFF in 15 minutes or does it repeat 15 minutes operation and 2 minutes stop.
If it turns to OFF in step 2) above, it is normal. If it repeats 15 minutes operation and 2 minutes stop, replace the body integrated unit.