Coolant Temperature Sensor/Switch (For Computer): Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Engine Coolant Temperature Sensor

REMOVAL

1. Disconnect the ground cable from battery.

2. Remove the generator.
3. Drain engine coolant.
4. Disconnect the connectors from the engine coolant temperature sensor.

5. Remove the engine coolant temperature sensor.

INSTALLATION

Install in the reverse order of removal.

NOTE: Use a new gasket.

Tightening torque: 18 N.m (1.8 kgf.m, 13.3 ft.lb)