Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2009 >> Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H6DO) >> Camshaft Position Sensor >> Removal >> Intake Side

Intake Side

Download the full database via torrent (~1.1 TB)
  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
  3. Remove the generator harness from the fuel protector LH.
  4. Remove the fuel protector LH.
    Fig 1: Locating Fuel Pipe Protector Bolts
    G05018408Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector from intake camshaft position sensor LH.
    Fig 2: Identifying Intake Camshaft Position Sensor LH
    G05667582Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the intake camshaft position sensor LH.
    Fig 3: Identifying Intake Camshaft Position Sensor LH
    G05667583Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the intake camshaft position sensor RH in the same procedure as LH.
scientia non olet · About Brad's Car Manuals