Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2010 >> Outback R Premium >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Front Differential Assembly >> Installation

Front Differential Assembly: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. When installing the front differential assembly to the case, be careful not to damage the inside of case (particularly, the differential side retainer mating surface).
    Fig 1: Identifying Front Differential Assembly
    G06652126Courtesy of SUBARU OF AMERICA, INC.
  2. Install the O-ring to left and right side retainers.
  3. Using the ST, install the side retainer. Ref. to ADJUSTMENT , Front Differential Assembly.

    ST 18630AA010 WRENCH COMPL RETAINER

  4. Adjust the backlash of the front differential. Ref. to ADJUSTMENT , Front Differential Assembly.
  5. Install the lock plate.

    Tightening torque: 

    25 N.m (2.5 kgf-m, 18.4 ft-lb) 

    Fig 2: Identifying Lock Plate
    G06652127Courtesy of SUBARU OF AMERICA, INC.
  6. Install the converter case to the transmission case. Ref. to INSTALLATION , Converter Case.
  7. Install the transmission harness connector to the stay.
  8. Install the ATF cooler pipe. Ref. to INSTALLATION , ATF Cooler Pipe and Hose.
  9. Install the torque converter assembly. Ref. to INSTALLATION , Torque Converter Assembly.
  10. Install the transmission assembly to the vehicle. Ref. to INSTALLATION , Automatic Transmission Assembly.
scientia non olet · About Brad's Car Manuals