Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Impact Sensor >> Installation

Impact Sensor: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove the key from ignition switch.
  2. Close all the doors and rear gate.
  3. Press the UNLOCK button of the keyless transmitter.
  4. Disconnect the ground cable from battery.
  5. Install the impact sensor.
  6. Change the impact sensor setting using the Subaru Select Monitor.
scientia non olet · About Brad's Car Manuals