Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Impact Sensor >> Operation

Impact Sensor: Operation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. IMPACT SENSOR SETTING USING SUBARU SELECT MONITOR
  2. Prepare the Subaru Select Monitor kit.
  3. Turn the ignition switch to ON (engine OFF) and run the "PC application for Subaru Select Monitor".
  4. On << System Selection Menu >> display, select {Integ. unit mode}.
  5. Select {ECM customizing}.
  6. Perform impact sensor ON/OFF setting.
    • Installed: ON
    • Removed: OFF
  7. Perform impact sensor ON/OFF setting.
    • Installed: ON
    • Removed: OFF
  8. Turn the ignition switch to OFF and remove the Subaru Select Monitor.
scientia non olet · About Brad's Car Manuals