Rearview Mirror: Installation
CAUTION:
When tightening the mounting TORX® screw, be sure to observe the tightening torque. Otherwise, the mount may be damaged in over-torque conditions.
Install each part in the reverse order of removal.
Tightening torque:
Refer to "COMPONENT" of "General Description". Refer to , MIRROR , COMPONENT, General Description.
NOTE:
If the mirror mount is removed, it is attached according to the following procedures.
- Remove the old adhesive completely.
- Attach the mirror mount by matching with the mark on the windshield glass.
- Make sure that the mirror mount is firmly adhered.
Adhesive:
REPAIR KIT IN MR (Part No. 65029FC000) or equivalent