Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Brake System) >> Stop Light Switch >> Installation

Stop Light Switch: Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the stop light switch onto the bracket with screws and position it with the nut.
  2. Adjust the stop light switch position, and then tighten the nut.

Refer to ADJUSTMENT , Stop Light Switch.

Tightening torque: 

8 N.m (0.8 kgf-m, 5.8 ft-lb) 

Fig 1: Identifying Stop Light Switch Nut Tightening Torque
G05032821Courtesy of SUBARU OF AMERICA, INC.